在 “节能增效，焕‘新’引领” 的全国节能宣传周主题下，众孚企业凭借领先的环氧树脂流化绝缘技术及系列产品，为产业绿色低碳转型提供了强有力的技术支撑。该技术不仅契合国家 “双碳” 目标及新型工业化绿色发展要求，更通过创新工艺与产品设计，在节能减碳领域展现出显著优势。
Under the theme of the National Energy Conservation Publicity Week, "Energy Efficiency Enhancement, Leading with 'New' Innovation,"OPTIMUS TECHNOLOGY CO,LTD has provided strong technical support for the green and low-carbon transformation of industries with its leading epoxy resin fluidized insulation technology and series of products. This technology not only aligns with the national "dual carbon" goals and the green development requirements of new industrialization but also demonstrates significant advantages in the field of energy conservation and carbon reduction through innovative processes and product designs.
节能增效的底层逻辑与创新突破
The Underlying Logic and Innovative Breakthroughs of Energy Efficiency Enhancement
低阻抗损耗，从源头实现节能
Low Impedance Loss: Achieving Energy Conservation from the Source
众孚环氧树脂流化绝缘技术通过高分子传导辐射材料与独特环氧树脂配方的结合，大幅降低了导体运行阻抗。根据技术原理，温度影响导体阻抗与压降，公式△W=I²RT 表明，阻抗 R 越小，能量损耗△W 越低。众孚技术使导体阻抗较传统绝缘材料降低约 30%，以 4000A 母线为例，年耗电量可减少约 12 万度，相当于每年减少 96 吨二氧化碳排放。
Optimus's epoxy resin fluidized insulation technology combines polymer conductive radiation materials with a unique epoxy resin formula, significantly reducing the operating impedance of conductors. According to technical principles, temperature affects conductor impedance and voltage drop, as shown in the formula △W=I²RT—where a smaller impedance R results in lower energy loss △W. Compared with traditional insulation materials,Optimus's technology reduces conductor impedance by approximately 30%. Taking a 4000Abusway as an example, this can reduce annual power consumption by about 120,000 kWh, equivalent to an annual reduction of 96 tons of carbon dioxide emissions.
高效散热，提升能量利用率
Efficient Heat Dissipation: Improving Energy Utilization Rate
流化绝缘层具备高传导辐射散热能力，可在高短路电流时快速导出热动能，避免导体因过热导致的能量浪费。与传统空气型母线依赖外壳通风孔散热不同，众孚密集型母线通过外壳直接整体散热，温升较传统产品降低 20 - 30℃，电能传输效率提升至 98% 以上，减少了因散热损耗的能量。
The fluidized insulation layer has high conductive radiation heat dissipation capability, which can quickly export thermal kinetic energy during high short-circuit currents, avoiding energy waste caused by conductor overheating. Unlike traditional air-type busways that rely on ventilation holes in the casing for heat dissipation,Optimus's densebusways dissipate heat directly through the entire casing, reducing temperature rise by 20–30°C compared with traditional products. The power transmission efficiency is increased to over 98%, minimizing energy loss from heat dissipation.
长寿命周期，降低全生命周期能耗
Long Service Life: Reducing Life-Cycle Energy Consumption
环氧树脂流化绝缘层的 H 级（180℃）绝缘等级远超传统 B 级（130℃）材料，配合 1800 小时盐雾测试认证及 - 40℃至 125℃冷热循环稳定性，使母线寿命达 40 年，较聚酯薄膜绝缘的 25 年延长 60%。更长的使用寿命意味着更少的产品更换频率，减少生产、运输及安装环节的能耗，全生命周期碳减排效果显著。
The H-class (180°C) insulation rating of the epoxy resin fluidized insulation layer far exceeds that of traditional B-class (130°C) materials. With 1,800-hour salt spray test certification and thermal cycle stability from -40°C to 125°C, the busway life reaches 40 years—60% longer than the 25-year life of polyester film insulation. A longer service life means fewer product replacements, reducing energy consumption in production, transportation, and installation, with 显著 (remarkable) life-cycle carbon reduction effects.
绿色低碳的多维实践与数据支撑
Multi-Dimensional Practices and Data Support for Green and Low-Carbon Goals
环保材料与工艺，从生产到应用的低碳闭环
Environmentally Friendly Materials and Processes: A Low-Carbon Closed Loop from Production to Application
众孚环氧树脂粉末材料通过 SGS 环保认证，不含镉、铅、汞等有害物质，生产过程采用自动化 PLC 控制的流化产线，减少人工干预的同时，避免了传统涂装工艺的 VOCs 排放。此外，流化层可重复循环使用，相同电流负载下导体尺寸缩小，降低了铜材开采需求，每公里母线可减少铜消耗约 1.2 吨，相当于减少 5.6 吨碳排放。
Optimus's epoxy resin powder materials have obtained SGS environmental certification, free of harmful substances such as cadmium, lead, and mercury. The production process uses a fluidized production line controlled by automated PLC, reducing manual intervention and avoiding VOCs emissions from traditional coating processes. In addition, the fluidized layer can be recycled, and the conductor size is reduced under the same current load, reducing copper mining demand. Each kilometer of busway can reduce copper consumption by about 1.2 tons, equivalent to a 5.6-ton carbon emission reduction.
防水防尘与耐候性，间接赋能节能场景
Waterproof, Dustproof, and Weather Resistance: Indirectly Empowering Energy Conservation Scenarios
IP66 及以上防护等级使母线可在重度污染环境（如化工、钢铁行业）稳定运行，避免因灰尘、水汽侵入导致的设备故障与能耗增加。
The protection rating of IP66 and above enables busways to operate stably in heavily polluted environments (such as chemical and steel industries), preventing equipment failures and increased energy consumption caused by dust and water vapor intrusion.
新型工业化绿色底色的深度融合
Deep Integration with the Green Foundation of New Industrialization
响应 “双碳” 目标，助力电气行业减排
Responding to "Dual Carbon" Goals and Assisting the Electrical Industry in Emission Reduction
众孚环氧流化绝缘技术满足对工业领域能效提升的要求，尤其在高层建筑、医院、海上石油平台等场景，其耐火（1300℃火焰下 10 秒无损坏）、抗冷热循环等特性，为高能耗行业提供了低碳解决方案。
Optimus's epoxy fluidized insulation technology meets the requirements for improving energy efficiency in industrial fields. Especially in scenarios such as high-rise buildings, hospitals, and offshore oil platforms, its fire resistance (no damage under a 1,300°C flame for 10 seconds), cold and heat cycle resistance, and other characteristics provide low-carbon solutions for high-energy-consuming industries.
支撑 “新型工业化”，引领技术创新方向
Supporting "New Industrialization" and Leading the Direction of Technological Innovation
作为国内拥有环氧树脂流化绝缘技术及专利的企业，众孚技术通过 KEMA、CB、UL等国际认证，其 IP68 防水等级、50% 接地能力等指标，为新型工业化中的电气设备节能标准树立了标杆。
As a domestic enterprise with epoxy resin fluidized insulation technology and patents,Optimus's technology has obtained international certifications such as KEMA, CB, and UL. Its indicators, including IP68 waterproof rating and 50% grounding capability, set a benchmark for energy-saving standards of electrical equipment in new industrialization.
众孚环氧树脂流化绝缘技术以 “节能增效” 为核心，以 “技术创新” 为驱动，通过材料、工艺、产品的全链条优化，为国家节能宣传周主题 “节能增效，焕‘新’引领” 提供了生动注解。在推进产业绿色低碳转型的进程中，众孚将持续发挥技术优势，以国际领先的绝缘解决方案，强化新型工业化绿色底色，为 “双碳” 目标的实现贡献企业力量。
With "energy efficiency enhancement" as the core and "technological innovation" as the driving force,Optimus's epoxy resin fluidized insulation technology provides a vivid interpretation of the National Energy Conservation Publicity Week theme, "Energy Efficiency Enhancement, Leading with 'New' Innovation," through full-chain optimization of materials, processes, and products. In the process of promoting the green and low-carbon transformation of industries,Mega will continue to leverage its technical advantages, strengthen the green foundation of new industrialization with internationally leading insulation solutions, and contribute to achieving the "dual carbon" goals.