電力系統設備溫度是判斷其運行狀態是否正常的核心表徵，一旦出現溫度異常，不僅會導致設備絕緣性能下降、使用壽命縮短，更可能引發供電故障，威脅人員與電網安全。眾孚企業有限公司針對性推出電力系統即時溫度監控技術方案，以專業設備與智慧系統，為電力設施築牢安全屏障。
The temperature of power system equipment is a core indicator for judging whether its operating status is normal. Once abnormal temperature occurs, it will not only lead to a decline in the insulation performance of the equipment and a shortening of its service life, but also may cause power supply failures and threaten the safety of personnel and the power grid. Optimus Technology Co., Ltd（Taiwan）. has launched a targeted real-time temperature monitoring technology solution for power systems, using professional equipment and intelligent systems to build a solid safety barrier for power facilities.
溫度異常隱患多，傳統檢測有局限Abnormal Temperature Carries Multiple Hidden Risks, and Traditional Detection Has Limitations
電力設備出現溫度異常，多源於設備製造品質缺陷、受環境污染、安裝不規範、嚴重超載運行、接點氧化、電弧衝擊等因素，最終會造成設備接觸電阻過大、溫度急劇升高，埋下安全隱患。Abnormal temperature in power equipment is mostly caused by factors such as defects in equipment manufacturing quality, environmental pollution, irregular installation, severe overload operation, contact oxidation, and arc impact. These factors will eventually lead to excessive contact resistance of the equipment and a sharp rise in temperature, laying hidden safety hazards.
此前，電力設備溫度檢測多依賴傳統手持紅外線熱顯像儀，但這種方式存在明顯短板：
僅能依靠定期檢修發現異常，無法實現即時警示；
人工記錄數據易丟失，難以支撐後續分析與檢修計畫制訂；
人工巡檢需進入危險區域，存在安全風險，更無提前預警的預防能力。
Previously, temperature detection of power equipment mostly relied on traditional hand-held infrared thermal imagers, but this method has obvious shortcomings:It can only detect abnormalities through regular maintenance and cannot realize real-time warnings;Manually recorded data is easy to lose, which makes it difficult to support subsequent analysis and the formulation of maintenance plans;Manual inspection requires entering dangerous areas, which poses safety risks and lacks the preventive capability of early warning.
即時監控系統，全方位超越傳統檢測Real-Time Monitoring System Outperforms Traditional Detection in All Aspects
為破解傳統檢測痛點，眾孚企業的即時式電子監控系統，與傳統手持設備相比，優勢顯著。
便捷性：可實現 24 小時不間斷線上監測，設備溫度超過限值即刻觸發聲光警示，告別「定期巡檢」的滯後性；
管理性：所有測溫節點數據集中接入監控系統，支援隨時儲存、查閱與分析，可精准制訂後期檢修計畫，避免人工記錄的疏漏與不便；
安全性：無需人員進入危險區域巡檢，徹底規避高危環境下的作業風險；
預防性：搭載完善的預警報警機制，可提前捕捉事故徵兆，從源頭預防故障發生；
成本性：雖初期設備投入較高，但後期可大幅提升管理效率，為企業節約綜合運維成本。
To address the pain points of traditional detection, Optimus's real-time electronic monitoring system has significant advantages compared with traditional hand-held equipment.
Convenience: It can realize 24/7 uninterrupted online monitoring. When the equipment temperature exceeds the limit, an acousto-optic warning is triggered immediately, eliminating the lag of "regular inspection";
Manageability: Data from all temperature measurement nodes is centrally connected to the monitoring system, supporting storage, viewing and analysis at any time. This enables the accurate formulation of later maintenance plans and avoids the omissions and inconveniences of manual recording;
Safety: It eliminates the need for personnel to enter dangerous areas for inspection, completely avoiding operational risks in high-risk environments;
Preventiveness: Equipped with a complete early warning and alarm mechanism, it can capture accident signs in advance and prevent faults from the source;
Cost-Effectiveness: Although the initial equipment investment is relatively high, it can greatly improve management efficiency in the later stage and help enterprises save comprehensive operation and maintenance costs.
四大核心效益，夯實供電安全基石Four Core Benefits to Consolidate the Foundation of Power Supply Safety
消除安全隱患：實現總線線路、高低壓配電盤一二次側所有接頭溫度即時監控與預設告警，從源頭預防事故，杜絕人員安全風險與供電中斷問題；
實現科學管理：依托即時監控數據，掌握負載與溫度變化規律，透過大數據分析優化用電管理，讓電力運維更具科學性與精准性；
保障系統穩定：將被動搶修轉為主動預防，真正落實事故防範舉措，保障供電系統持續穩定運轉；
提升運維效率：數據集中管理與智慧分析，大幅降低人工巡檢與數據整理成本，提升整體運維管理效能。
Eliminate Safety Hazards: It realizes real-time monitoring and preset alarms for the temperature of all joints on the primary and secondary sides of bus lines and high-low voltage distribution panels, preventing accidents from the source and eliminating personnel safety risks and power supply interruption problems;
Realize Scientific Management: Based on real-time monitoring data, it grasps the laws of load and temperature changes, optimizes power consumption management through big data analysis, and makes power operation and maintenance more scientific and accurate;
Ensure System Stability: It transforms passive emergency repair into active prevention, truly implements accident prevention measures, and ensures the continuous and stable operation of the power supply system;
Improve Operation and Maintenance Efficiency: Centralized data management and intelligent analysis greatly reduce the costs of manual inspection and data sorting, and improve the overall operation and maintenance management efficiency.
電力安全無小事，溫度監測是關鍵。眾孚企業以專業的技術方案與可靠的設備配置，為電力系統安全運行保駕護航！
No detail is trivial in power safety, and temperature monitoring is the key. With professional technical solutions and reliable equipment configuration, Optimus provides strong support for the safe operation of power systems!