您的當前位置 : 首页 → 新聞資訊

聯繫我們Contact Us

眾孚企業有限公司

連絡人:劉紹民

手機:15205288168

電話:+886937141458

座機:+88673458385

郵箱:vicara88@ms17.hinet.net

網址:www.optimus-busway.com

地址:台灣高雄市左營區政德路805號6樓

工廠:高雄市大寮區鳳林二路293-74號

鳳屏廠(行政管理中心):高雄市大寮區鳯屏一路5號B1棟

液冷資料中心配電:匯流排選型如何適配高濕高熱環境

隨著AI算力密度持續提升,液冷資料中心占比逐步擴大。相較於傳統風冷機房,液冷場景的環境溫濕度特徵發生顯著變化,配電系統面臨更嚴苛的工況考驗。匯流排作為主幹輸配電核心載體,其環境適配性直接關係到資料中心的長期運行可靠性與維運成本。選型適配不足,極易引發絕緣下降、凝露放電、接頭發熱等隱性故障,成為算力穩定運行的隱憂。 As AI computing power density continues to rise, liquid-cooled data centers account for an increasing share of the market. Compared with traditional air-cooled computer rooms, liquid-cooled environments feature drastically different temperature and humidity conditions, imposing harsher operating conditions on power distribution systems. As the core backbone for power transmission and distribution, the environmental adaptability of busways directly determines the long-term operational reliability and O&M costs of data centers. Improper selection may easily trigger latent faults such as insulation degradation, condensation discharge and connector overheating, posing risks to stable computing operation.

一、液冷場景的配電核心工況挑戰

I. Core Operating Challenges for Power Distribution in Liquid-Cooled Environments

液冷資料中心透過冷卻液帶走IT設備熱量,機房整體環境呈現出與傳統場景截然不同的特點,對配電設備形成三重考驗: Liquid-cooled data centers remove heat from IT equipment via coolant, creating an overall environment distinctly different from traditional setups and bringing three major challenges to power distribution equipment:

環境濕度偏高:冷板、浸沒式液冷系統周邊空氣濕度顯著高於風冷機房,局部區域易達到高濕狀態,配電設備長期處於高濕環境中,絕緣受潮風險加劇; Elevated ambient humidity: Humidity around cold-plate and immersion liquid cooling systems is markedly higher than in air-cooled rooms. Local zones tend to reach high-humidity conditions. Long-term exposure of power distribution equipment to such environments raises the risk of dampened insulation;

局部熱聚集明顯:機櫃進回水溫差造成週邊環境溫度分佈不均,匯流排敷設路徑若靠近熱源區域,長期處於局部高溫環境,會加速絕緣材料老化; Obvious localized heat accumulation: Temperature differences between the inlet and return coolant of cabinets create uneven ambient temperature distribution. Busways routed close to heat sources will undergo long-term localized high temperatures, accelerating the aging of insulation materials;

溫差凝露風險:機房不同區域溫差、設備啟停溫度波動,容易在匯流排殼體與絕緣層表面形成凝露,尤其是傳統拼接結構的縫隙處,凝露更容易侵入內部。 Condensation risk from temperature differences: Temperature gaps across different areas of the room and thermal fluctuations during equipment startup and shutdown tend to form condensation on the surface of busway enclosures and insulation layers. Condensation is especially prone to seep into gaps of conventional spliced structures.

二、傳統包覆式匯流排的場景適配短板

II. Limitations of Traditional Cladded Busways for This Application

常規空氣型、普通包覆式匯流排在液冷高濕高熱場景中,存在結構性的適配短板: Standard air-type and ordinary cladded busways have inherent structural drawbacks when deployed in high-humidity and high-temperature liquid cooling environments:

結構縫隙容易受潮:傳統匯流排大多為拼接式殼體、包覆式絕緣,存在拼接縫隙、絕緣介面間隙,高濕環境下水汽容易侵入內部,累積在絕緣層與導體之間,造成絕緣電阻快速下降,甚至引發爬電、短路故障; Vulnerability to moisture ingress through structural gaps: Conventional busways mostly adopt spliced enclosures and cladded insulation with seams and interfacial gaps. Moisture vapor easily penetrates and accumulates between insulation layers and conductors under high humidity, causing rapid drop of insulation resistance and even tracking or short-circuit faults;

氣隙加速絕緣老化:包覆式絕緣層與導體之間存在微小氣隙,高溫高濕環境下氣隙內易形成局部放電,長期運轉會加速絕緣老化擊穿,大幅縮短設備使用壽命; Air gaps accelerate insulation aging: Tiny air gaps exist between cladded insulation and conductors. Partial discharge readily occurs inside these gaps under high temperature and humidity. Long-term operation speeds up insulation aging and breakdown, greatly shortening equipment service life;

維運排查難度高:內部受潮、氣隙放電屬於隱性故障,常規巡檢難以早期發現,往往發展到溫升報警、絕緣擊穿時才暴露,處置被動且影響範圍大。 Difficulties in maintenance inspection: Internal dampening and air-gap discharge are latent faults that are hard to detect during routine patrols. Problems are usually identified only after temperature rise alarms or insulation breakdown, leading to passive troubleshooting and wide-ranging impacts.

三、適配液冷場景的匯流排選型核心維度

III. Core Criteria for Busway Selection for Liquid-Cooled Scenarios

針對液冷場景的工況特性,匯流排選型需從絕緣結構、耐溫性能、密封性能三個核心維度著手,從結構根源提升環境適配性: In response to the operating characteristics of liquid cooling environments, busway selection shall focus on three core dimensions: insulation structure, temperature resistance and sealing performance, so as to improve environmental adaptability fundamentally through design:

優先選用一體式絕緣結構、採用環氧樹脂流動化絕緣工藝的匯流排,絕緣層與導體透過一體成型工藝緻密結合,無氣隙、無介面縫隙,從結構上杜絕水汽侵入、氣隙放電的路徑。緻密絕緣層可有效阻隔外部濕氣,即使處於高濕環境,絕緣性能也能長期維持穩定,大幅降低受潮故障風險。眾孚企業環氧樹脂流動化絕緣匯流排即是採用此工藝,絕緣層連續均勻、無接駁斷點,整體密封性能優異,適合高濕環境下的長期運作需求。 Prioritize monolithic insulation structure: Busways manufactured with epoxy fluidized insulation technology feature insulation layers tightly bonded to conductors via one-piece forming. Free of air gaps and interfacial seams, they structurally block moisture ingress and air-gap discharge. The dense insulation barrier effectively repels ambient moisture and maintains stable insulation performance over the long term even under high humidity, sharply reducing damp-related failure risks. Optimus Technology’s epoxy fluidized insulated busway adopts this process, delivering continuous, uniform insulation without splice breaks and excellent overall sealing for long-term operation in high-humidity environments.

符合場景的耐溫等級裕量 液冷場景局部溫度波動大,匯流排耐溫等級需預留充足裕量。優先選用耐溫等級達 H 級(180℃)的產品,即使在局部高溫區域、滿負荷運行工況下,仍能保持絕緣性能穩定,避免因溫度超標導致的絕緣加速老化。 Sufficient temperature resistance margin matching the scenario: Liquid cooling environments have sharp local temperature fluctuations, so busways must carry adequate temperature rating margin. Products with Class H (180℃) temperature resistance are preferred. They sustain stable insulation performance under localized high heat and full-load operation, preventing accelerated insulation aging caused by excessive temperature.

採用免維護設計降低維運干擾 一體式密封結構的匯流排,日常運作無需開蓋檢查內部受潮狀況,僅需外部紅外測溫與外觀巡檢即可,大幅減少維運人員的開蓋操作頻率,既降低維運工作量,也避免開蓋過程中水氣、粉塵侵入設備內部。Adopt maintenance-free design to reduce O&M workload: Busways with monolithic sealed structures do not require cover opening for internal moisture checks during normal operation. Only external infrared temperature measurement and visual inspection are needed. This greatly reduces the frequency of cover-opening work for maintenance teams and prevents moisture and dust from entering the unit during inspection.

四、選型前置是降低液冷配電風險的關鍵

IV. Front-End Selection Is Critical to Mitigate Power Distribution Risks in Liquid-Cooled Facilities

液冷資料中心的配電可靠度,很大程度上在選型階段即已決定。針對場景特性選擇合適的匯流排結構,而非直接套用傳統風冷場景的選型標準,可從根源降低高濕高熱環境下的絕緣故障機率,延長設備使用壽命,減少全生命週期的維運投入。 The power distribution reliability of a liquid-cooled data center is largely determined at the selection stage. Selecting busway structures tailored to site conditions, instead of directly adopting selection criteria designed for air-cooled rooms, fundamentally reduces the probability of insulation faults under high temperature and humidity, extends equipment service life and cuts the total life-cycle O&M expenditure.

眾孚企業可針對液冷資料中心場景提供客製化的絕緣匯流排解決方案,結合專案敷設路徑與環境特性優化產品配置,協助算力基礎設施穩定運作。 Optimus Technology provides customized insulated busway solutions for liquid-cooled data centers. We optimize product configurations according to routing layouts and ambient conditions of each project to support stable operation of computing infrastructure.