您的當前位置 : 首页 → 新聞資訊

聯繫我們Contact Us

眾孚企業有限公司

連絡人:劉紹民

手機:15205288168

電話:+886937141458

座機:+88673458385

郵箱:vicara88@ms17.hinet.net

網址:www.optimus-busway.com

地址:台灣高雄市左營區政德路805號6樓

工廠:高雄市大寮區鳳林二路293-74號

鳳屏廠(行政管理中心):高雄市大寮區鳯屏一路5號B1棟

存量資料中心配電擴容:如何最大限度降低停機影響

隨著 AI 算力密度提升與業務規模擴張,大量既有資料中心面臨配電容量升級需求。相較於新建專案,既有機房改造的核心矛盾在於:擴容需求迫切,但業務連續性要求極高,傳統配電改造方案往往需要全線停電施工,單次停機帶來的業務損失與合規風險遠高於設備改造成本本身。如何在最大限度降低停機影響的前提下完成匯流排擴容,成為既有資料中心配電升級的核心課題。 As AI computing power density increases and business scales expand, a large number of existing data centers are confronted with the demand for power distribution capacity upgrade. Compared with new-build projects, the core contradiction of existing computer room renovation lies in the urgent demand for capacity expansion paired with stringent business continuity requirements. Conventional power distribution renovation solutions usually require full-line power outage for construction. The business loss and compliance risk caused by a single shutdown far exceed the cost of equipment modification. How to complete busway expansion while minimizing the impact of outages has become a core issue for power distribution upgrades in existing data centers.

一、傳統匯流排擴容的三類典型痛點 Three Typical Pain Points of Traditional Busway Expansion 

存量機房配電改造的難點,本質上是在運系統與改造作業的衝突,傳統方案普遍存在三方面短板: The difficulty of power distribution renovation for existing computer rooms essentially stems from conflicts between live operating systems and renovation work. Traditional solutions generally have three shortcomings:

全線停電,業務影響範圍大 傳統匯流排擴容需斷開上級主電源,涉及整條供電鏈路的停電作業,影響範圍覆蓋對應迴路的全部機櫃與業務系統,停機時長通常以天為單位,對營運中的託管業務、自有算力業務均會造成直接損失。 Full-line power outage with wide business impact: Traditional busway expansion requires disconnecting the upstream main power supply and involves power-cut work for the entire power supply chain. The impact covers all cabinets and business systems on the corresponding circuit. Shutdown duration is usually measured in days, causing direct losses to co-location services and self-owned computing services in operation.

現場改制作業多,品質可控性差。非標準化改造需於現場完成匯流排裁切、接頭改製、絕緣修復等作業,施工環境與工藝精度皆不如工廠預製,容易破壞原有防護結構與絕緣性能,為後續運行埋下接頭發熱、絕緣衰減等潛在隱憂。 Extensive on-site modification with poor quality controllability: Non-standard renovation requires on-site work including busway cutting, interface reworking and insulation repair. Construction environment and process precision are inferior to factory prefabrication. The original protective structure and insulation performance are easily damaged, bringing latent risks such as joint overheating and insulation degradation for later operation.

新舊系統適配性差,若擴容段與原有匯流排分屬不同品牌、不同工藝標準,介面公差、絕緣等級、載流特性難以完全匹配,容易出現接觸不良、性能衰減不一致等問題,後期維運責任邊界模糊,故障排查難度高。 Poor compatibility between new and old systems: If the expanded sections and original busways come from different brands and adopt different process standards, interface tolerances, insulation classes and current-carrying characteristics can hardly be fully matched. Problems such as poor contact and inconsistent performance degradation are likely to occur. The responsibility boundary for subsequent operation and maintenance becomes ambiguous, making fault troubleshooting difficult.

二、模組化插接方案:低干擾擴容的可行路徑 Modular Plug-in Solution: A Feasible Path for Low-Disturbance Expansion

採用標準化、模組化設計的插接式匯流排,可從施工模式、產品型態上系統性降低擴容改造對運轉中系統的影響,核心優勢體現在三個維度: Plug-in busways with standardized and modular design can systematically reduce the impact of expansion renovation on live operating systems in terms of construction mode and product form. Its core advantages are reflected in three dimensions:

工廠預製標準模組,現場少改作 所有擴容匯流排段、插接單元均在工廠內完成預製生產與出廠檢測,尺寸精度、絕緣性能、結構強度均符合原廠統一標準。現場僅需完成段體拼接與插接作業,無需大規模切割、改作,最大限度保留產品原廠品質,避免現場施工帶來的品質隱憂。 Factory-prefabricated standard modules with minimal on-site modification: All expanded busway sections and plug-in units are prefabricated and tested before delivery in the factory. Dimensional accuracy, insulation performance and structural strength comply with unified original manufacturer standards. Only section assembly and plug-in connection are required on site without large-scale cutting or reworking, which maximally retains original factory quality and avoids quality risks from on-site construction.

分段分區作業,縮小停電範圍 模組化匯流排支援分迴路、分段停電作業。改造過程中,僅需斷開待擴容區段的局部電源,無需整條匯流排全線停機;非改造區段可維持正常供電,將停電影響範圍壓縮至最小,顯著降低對營運中業務的衝擊。 Segmented and zoned construction to narrow outage scope: Modular busways support circuit-based and sectional power-cut construction. During renovation, only the local power supply of the section to be expanded needs to be disconnected instead of shutting down the whole busway. Non-renovation sections can remain powered normally, minimizing the outage scope and greatly reducing impact on running services.

原廠標準統一,擴容後效能一致 擴容段與原有匯流排採用同一工藝體系、同一介面規格、同一效能標準,絕緣等級、載流能力、溫升特性維持高度一致,徹底規避多品牌拼接的適配風險,保障擴容後系統整體可靠度與維運統一性。 Unified original manufacturer standards for consistent performance after expansion: The expanded sections and original busways adopt the same process system, interface specifications and performance standards. Insulation class, current-carrying capacity and temperature rise characteristics are highly consistent. Compatibility risks caused by mixing multiple brands are completely avoided, ensuring overall system reliability and unified O&M after expansion.

三、眾孚企業的落地支援 Implementation Support from Optimus Technology 

眾孚企業環氧樹脂流化絕緣匯流排採用全系列標準化模組化設計,搭配原廠全規格插接單元與連接組件,可針對既有資料中心的擴充需求提供客製化改造方案: Optimus Technology’s epoxy resin fluidized insulated busway adopts full-series standardized modular design, equipped with full-range original plug-in units and connection components. Customized renovation solutions can be provided for expansion demands of existing data centers:

前期可配合現場勘測,結合原有匯流排規格、敷設路徑與擴容目標,制訂低干擾施工方案,最大限度優化停電範圍與施工週期; In the early stage, we can cooperate with site survey and formulate low-disturbance construction plans based on original busway specifications, routing paths and expansion goals to optimize the outage scope and construction cycle to the greatest extent;

所有擴容部件均為原廠預製生產,經出廠檢測合格後才可出貨,確保與原有系統的適配性與效能一致性; All expansion components are prefabricated by the manufacturer and delivered only after passing factory inspection to guarantee compatibility and consistent performance with the original system;

施工階段可提供全程技術指導,配合現場完成接駁調試,保障改造後系統平穩投運。 Full-process technical guidance is available during construction to assist on-site connection and commissioning, ensuring stable commissioning of the renovated system.

既有資料中心配電擴容,核心是在業務連續性與容量升級之間找到最佳平衡。選用模組化插接式匯流排方案,可有效降低停機影響、控制改造風險、維持長期運作可靠度,是既有算力設施配電升級的務實方案。 The core of power distribution expansion for existing data centers is to strike an optimal balance between business continuity and capacity upgrade. Adopting the modular plug-in busway solution can effectively reduce outage impact, control renovation risks and ensure long-term operational reliability, making it a practical path for power distribution upgrades of existing computing facilities.